To record using the camera

1. Turn on VCR for recording camera.

2. Insert VHS videocassette into the VCR for recording camera.

3. Using the Channel Select, go up or down to channel A1.

4. Clip the wireless microphone close to your neck.

5. Turn wireless microphone on from the belt pack.

6. Press the REC button on the VCR for recording camera once and ONLY once to begin recording. A red REC should appear on the VCR for recording camera display panel.

7. To stop recording press the stop button.

8. To pause recording press the pause button.

9. To restart recording after paused, press the pause button again.

Additional Information

1. By turning the video projector on (see other instructions) and selecting the VCR for recording camera rack button, you can view the angle the camera will receive.

2. The VHS videocassette must have the erasure prevention tab intact.

3. If the REC button on the VCR for recording camera is pressed more than once, continue pressing it until the numbers disappear from the VCR for recording camera display panel.

4. Remember that the VCR for recording camera must be on A1. If not, then it will not record from the camera.

5. The remote control will not operate the VCR for recording camera.

6. To schedule a training time, contact Classroom Services at x4395.